Pressure Washers

Pressure Washers

You can count on Champion Power Equipment Pressure Washers to combine practical features with high-performance components for cost-effective, do-it-yourself cleaning power for all your outdoor projects.

Filter Products

Sorry - no results to the filters you have selected.
UK flag EU flag Model: 100384 Champion 220 Bar (3200 PSI) 9.0 LPM Pressure Washer

Champion 220 Bar (3200 PSI) 9.0 LPM Pressure Washer

Capacity:
220 Bar (3200 psi)
Min Flow Rate:
9 Ltr/min
Start Type:
Recoil
UK flag EU flag Model: 100386 Champion 289 Bar (4200 PSI) 15.1 LPM Pressure Washer

Champion 289 Bar (4200 PSI) 15.1 LPM Pressure Washer

Capacity:
289 Bar (4200 psi)
Min Flow Rate:
15.1 Ltr/min
Start Type:
Recoil

Starting vs Max vs Running Watts

Most motor-driven products that you will connect to your generator need extra watts when they start, this is known as starting watts.

The Starting Watts listed on your generator is the wattage the generator can output for an average of 6 seconds (Inverter) or 10 minutes (Open Frame Type).

Once this period is over, and if the wattage has not reduced the Overload Protection will activate and the generator will trip using the following methods circuit breaker (frame type) and flashing overload light (Inverter), if this happens the power (wattage) needs to reduced or disconnected immediately and the generator needs to be reset by stopping the generator and turning everything to the ‘OFF’ position and leaving for minimum 2 minutes (Inverter Only).

The Maximum Watts listed on your generator is the MAX watts output the generator can run at – however it is not recommended to run your generator at the  maximum watts for periods more than average 5 minutes (Inverter) and 60 minutes (Open Frame Type). Once this period is over, and if the wattage has not reduced the Overload Protection will activate and the generator will trip using the following methods circuit breaker (frame type) and flashing overload light (Inverter), if this happens the power (wattage) needs to reduced or disconnected immediately and the generator needs to be reset by stopping the generator and turning everything to the ‘OFF’ position and leaving for minimum 2 minutes. While working in the max zone on an Inverter you will have solid red overload light this is normal.