Please note: This model is available in the UK exclusively through Costco. View on Costco Website
This Dolly Style Petrol Powered Pressure Washer with Annovi Reverberi Axial Cam Pump provides cost effective, "do-it-yourself" cleaning power.
It is a perfect, hassle-free solution for cleaning patios, decks, outdoor furniture, siding, fences, driveways, cars, trucks, boats, RVs, farm equipment and more.
The 2600 PSI Pressure Washer comes with three quick connect nozzles for a variety of applications – 0°, 25°, soap. A high quality Annovi Reverberi axial cam pump ensures steady nozzle pressure for consistent cleaning performane.
Champion’s lightweight and compact design along with the never-flat tires make this pressure washer easy to maneuver. The cleverly designed onboard storage for the high-pressure hose, trigger gun and spray wand ensure you’ll have what you need when you need it, plus you’ll be able to keep moving without having to stop and put things away.
The cast-iron sleeve and durable steel frame are built to last. Powered by a 196cc Champion single-cylinder OHV engine with a 3.4 liter fuel tank and designed with a low oil shut-off sensor, this unit has a 0.6 liter oil capacity (recommended 10W-30).
These pressure washers are mains feed only and require a minimum flow rate of 5ltr/min. They are not designed to be used with portable tanks or containers.
All newly manufactured products are EU Stage V Compliant.
Capacity | 179 Bar (2600 psi) |
---|---|
Engine | 196cc 6HP Champion OHV |
Fuel Capacity | 3.4 |
Oil Capacity | 0.6 |
Start Type | Recoil |
Low Oil Shutoff | Included |
Dimensions L*W*H (Fully Assembled) |
68 x 46.7 x 97.2 cm (26.8 x 18.4 x 38.3 in) |
Nett Weight | 28.7 kg (63.3 lbs) |
Wheels | 30cm Solid |
Max Water Temp | 104°F (40°C) |
Chemical Injection | |
Min Flow Rate | 8.3 l/min |
Wand | Quick Connect |
Hose | 7.62m / 25ft |
Hose Storage | Built-in |
Warranty | 2 Years Limited |
Certification | EPA, CARB, CE, EU Stage V, E10 Petrol Compliant |
Most motor-driven products that you will connect to your generator need extra watts when they start, this is known as starting watts.
The Starting Watts listed on your generator is the wattage the generator can output for an average of 6 seconds (Inverter) or 10 minutes (Open Frame Type).
Once this period is over, and if the wattage has not reduced the Overload Protection will activate and the generator will trip using the following methods circuit breaker (frame type) and flashing overload light (Inverter), if this happens the power (wattage) needs to reduced or disconnected immediately and the generator needs to be reset by stopping the generator and turning everything to the ‘OFF’ position and leaving for minimum 2 minutes (Inverter Only).
The Maximum Watts listed on your generator is the MAX watts output the generator can run at – however it is not recommended to run your generator at the maximum watts for periods more than average 5 minutes (Inverter) and 60 minutes (Open Frame Type). Once this period is over, and if the wattage has not reduced the Overload Protection will activate and the generator will trip using the following methods circuit breaker (frame type) and flashing overload light (Inverter), if this happens the power (wattage) needs to reduced or disconnected immediately and the generator needs to be reset by stopping the generator and turning everything to the ‘OFF’ position and leaving for minimum 2 minutes. While working in the max zone on an Inverter you will have solid red overload light this is normal.