Champion's 3200-PSI Petrol Pressure Washer with 9 LPM features five nozzles, two detergent tanks, a 7.6m high-pressure hose, comfort-grip gun and an axial cam pump for consistent cleaning.
This Dolly Style Gas Powered Pressure Washer with Annovi Reverberi Axial Cam Pump provides cost effective, "do-it-yourself" cleaning power.
It is a perfect, hassle-free solution for cleaning patios, decks, outdoor furniture, siding, fences, driveways, cars, trucks, boats, RVs, farm equipment and more.
The 3200 PSI Pressure Washer comes with five quick connect nozzles for a variety of applications – 0°, 15°, 25°, 40°, soap.
Extend your reach with the included 7.6m high-pressure hose and use cleaning detergents hassle-free when you connect the 1.2m detergent hose with the two handy onboard 1.9 litre detergent tanks.
A high quality Annovi Reverberi axial cam pump ensures steady nozzle pressure for consistent cleaning performance.
Champion’s dolly-style design along with the 30cm never-flat tires make this pressure washer easy to maneuver. The cleverly designed onboard storage for the pressure hose, trigger gun and spray wand ensure you’ll have what you need when you need it, plus you’ll be able to keep moving without having to stop and put things away.
The durable steel frame is built to last. Powered by a 224cc Champion single-cylinder OHV engine with a 3.4 liter fuel tank and designed with a low oil shut-off sensor, this unit has a 0.6 litre oil capacity (recommended 10W-30).
These pressure washers are mains feed only and require a minimum flow rate of 5ltr/min. They are not designed to be used with portable tanks or containers.
All newly manufactured products are EU Stage V Compliant.
|Capacity||220 Bar (3200 psi)|
|Engine||224cc 6.8HP Champion OHV|
|Low Oil Shutoff||Included|
|68 x 46.7 x 97.2 cm
(26.8 x 18.4 x 38.3 in)
|Nett Weight||28.7 kg
|Max Water Temp||104°F (40°C)|
|Min Flow Rate||9 l/min|
|Hose||7.62m / 25ft|
|Warranty||2 Years Limited|
|Certification||EPA, CARB, CE, EU Stage V, E10 Petrol Compliant|
Most motor-driven products that you will connect to your generator need extra watts when they start, this is known as starting watts.
The Starting Watts listed on your generator is the wattage the generator can output for an average of 6 seconds (Inverter) or 10 minutes (Open Frame Type).
Once this period is over, and if the wattage has not reduced the Overload Protection will activate and the generator will trip using the following methods circuit breaker (frame type) and flashing overload light (Inverter), if this happens the power (wattage) needs to reduced or disconnected immediately and the generator needs to be reset by stopping the generator and turning everything to the ‘OFF’ position and leaving for minimum 2 minutes (Inverter Only).
The Maximum Watts listed on your generator is the MAX watts output the generator can run at – however it is not recommended to run your generator at the maximum watts for periods more than average 5 minutes (Inverter) and 60 minutes (Open Frame Type). Once this period is over, and if the wattage has not reduced the Overload Protection will activate and the generator will trip using the following methods circuit breaker (frame type) and flashing overload light (Inverter), if this happens the power (wattage) needs to reduced or disconnected immediately and the generator needs to be reset by stopping the generator and turning everything to the ‘OFF’ position and leaving for minimum 2 minutes. While working in the max zone on an Inverter you will have solid red overload light this is normal.